Hello All Unfortunately the re cultured samples hadn’t…

Hello All,

Unfortunately the re cultured samples hadn’t grown enough on Monday to use, so we left them another day and night until Tuesday. Today, although the growth was minimal we decided to start plug making. We added chloramphenicol to the samples, left them for an hour, and then centrifuged them all down until we had appropriate sized pellets. However, some of the samples did not readily form pellets, and several pellets were much smaller than others or were very dark in colour.

We then combined the pellets with cell suspension buffer, shook them to combine and added agarose. We then pipetted the samples into plug molds and left them to solidify in the fridge. Once solid, we pushed each plug into a separate eppendorf, added appropriate lysozyme, buffer and mutanolysin. However one plug hadn’t soldified enough and was discared. They are now incubating at 37C. At 6, i will remove the lysozyme, buffer and mutanolysin, and add proteinase K and buffer. Incubating them overnight at 50C.

Tomorrow we will be washing the plugs, and incubating them in restriction enzyme, buffer and BSA.

Hey All When we checked the growth of…

Hey All,

When we checked the growth of the 10 different strain samples of propionibacterium acnes this morning we were happy with most of them, expect a few which were still abit clear. We decided to proceed anyway with plug making, adding chloramphenicol to them for a hour, then centrifuging down 3ml of all samples.
We then centifuged the others further down until all pellets appeared the same size and roughly the same size as the previous most successful plug making. While doing this we melted agarose in a waterbath slowly at 50C.
Once all pellets were appropriate sizes, we added cell suspension buffer, eluted the pellets and added agarose. We kept the agarose, cell suspension buffer and cells at 50C, and pipetted each sample into a mold. Producing 1 plug per sample.
Once solidified, we pushed each plug into a separate universal, added lysozyme, buffer and mutanolysin. This is now incubating at 37C until half 7/half 8pm. After which Mike will remove lysozyme, buffer and mutanolysin and add proteinase K and buffer, incubating it at 50C until tomorrow morning.

Unfortunatly we ran out of lysozyme and proteinase K buffers, so Mike had us make up our own from 1M tris HCL pH8 buffer, sodium dodeyl sulphate (SDS), 0.5M EDTA pH8 and pure water.

Tomorrow we will be washing the plugs and incubating them in SpeI. See you all tomorrow!

Hey Everyone Today was a loooong day Came…

Hey Everyone,

Today was a loooong day! Came in at 9am, and as the plugs were still fairly cloudy, Mike suggested we leave them abit longer to allow further lysis, and therefore make the plugs clearer. We made up a fresh solution of lysozyme, proteinase K and mutanolysin, and left the plugs to incubate further until 12pm.

I then began washing the plugs in 1x wash buffer, 1hr each four times. Once finished i washed the plugs in 0.1x wash buffer for an hour twice. I then removed the wash buffer and added speI buffer to allow the plugs to incubate for an hour. After this i added fresh buffer, SpeI enzyme and BSA. The plugs will incubate overnight at 37C.

I made appropriate modifications in amount of lysozyme, mutanolysin, SpeI buffer and enzyme etc. In order to compensate for an increase in DNA conc.

Tomorrow i will be filming my new videoblog, then incubating the plugs in 1x wash buffer, and in 0.5x TAE buffer, before setting up and running a new gel with our new modifications, that looked like they worked very well on weds.

Hello Today i began by removing the gel…

Hello,

Today i began by removing the gel, staining it and viewing it. The gel was much cleaner than before, and the low range PFG marker showed very clear bands, while the restriction enzyme treated plug showed some separation but blurring as before. This confirmed that the problem lies with the plugs, not the settings. Which will hopefully be cleaned up, after DNA conc. is increased in the new plugs.

I began plug making as the Propionbacterium acnes 6919 strain sample had nearly grown enough. Mike suggested i use 2 tubes of 10ml Propionbacterium acnes 6919 strain sample, add chloramphenicol and centrifuge down all 10ml of both samples. This produced a large pellet that i then eluted in cell suspension buffer and combined with agarose. I then pipetted this into 5 plugs molds, and left these to solidify. Once this had happened, i pushed them out into a universal, added lysozyme, buffer and mutanolysin and left to incubate at 37C, for 5 hrs. I then removed this, and added proteinase K and buffer, and incubated overnight at 50C.

Tomorrow i will begin washing the plugs, and treating them with SpeI.

Hello Today we removed our latest gel stained…

Hello,

Today we removed our latest gel, stained it and viewed it. Unfortunately we didn’t get very good results – there was alot of blurring on one the low range PFG marker samples, lack of clear band separation on the low range PFG marker samples and no expected band just below the wells for the non restriction enzyme plugs.

We decided that this was most likely due to lack of cell density, and therefore lack of DNA which that could be seen on the gel. We discussed that this could most likely to be fixed by allowing the Propionbacterium acnes samples to grow longer and therefore increase the cell density and DNA, and possibly by centrifuging more of the sample, to reach a higher conc. We also re researched info on cell density within plugs in the manual and journals – we found that the optimum OD was around 0.8-1.0 and we had been working with 0.24. Because of this increase in cell density/conc. we will also need to increase our lysozyme, mutanolysin and proteinase K to compensate.

Mike asked us to run a standard gel, in order to see if there was actually any DNA present at all. We ran a 0.8% gel, for 2 and half hours at 120V/cm with a 1kb ladder. We saw very faint separation, that did confirm that DNA was present, but at very low density/conc. as expected. This also confirmed our modifications which we will put into practise when i come from holiday on Monday 6th August.

After speaking to Mike we decided to attempt to run a new PFGE gel using the whole Propionbacterium acnes restriction treated plug, in one well, in order to use as much DNA as possible, and hopefully see some separation showing multiple bands due to lysis. We ran this 1% gel at 6V/cm, for 15hours with 1-12 sec switch interval ramping, using a whole Propionbacterium acnes restriction treated plug and the low range PFG marker.

Tomorrow we will be viewing this gel and filming our latest videoblog! 🙂

Afternoon Today myself and Jo removed the plugs…

Afternoon,

Today, myself and Jo removed the plugs from the molds into a universal, added lysozyme and mutanolysin and incubated the plugs for 4 hours at 37ºC. During that time we began filming interviews with other students in the lab, discussing their projects/work, positives, negatives and what they had enjoyed and found challenging. We then removed the lysozyme and mutanolsyin and added proteinase K, leaving the plugs to incubate overnight at 50ºC.

Tomorrow we will be washing the plugs, hopefully running a PFGE gel with non restriction enzyme plugs and treating other plugs with the restriction enzyme, Spe1. We will also hopefully be filming another interview in the lab! 🙂

Evening All Didn’t come into the lab till…

Evening All,

Didn’t come into the lab till 4pm today, in order to allow our Propionibacterium acnes 6919 strain to grow sufficiently. We took 7ml of the Propionibacterium acnes 6919 strain added 14ul of chloramphenicol and incubated for an hour. Then we pipetted 1ml into 2 eppendorfs and spun them down for 5 mins at full speed. Once pellet, we added 250ul of cell suspension buffer into both, shook and then combined. We then added 500ul of melted agarose and pipetted into 5 plug molds. We then put them into the fridge to set.

We have left them in the fridge till tomorrow, when we will treat the plugs with lysozyme, mutanolysin and proteinase K.

See you all tomorrow! 🙂

Hello Filmed our newest videoblog this morning in…

Hello,

Filmed our newest videoblog this morning, in 5 mins! Our quickest yet – we are becoming pros! 🙂
Removed, stained and viewed our newest gel today. Unfortunately we got pretty conclusive results that our plugs were the problem. No separation was present from our old or new plugs, therefore next week we need to completely remake plugs.

We will be making 5 plugs all from Propionibacterium acnes 6919 strain, taking extra care to pipette very carefully, in order to produce better plugs. We will also only be producing our plugs up until treatment with lysozyme, mutanolysin and proteinase K, then running them on PFGE, to see if they are viable, before treating and running them with restriction enzyme, Spe1.

We are expecting to see one very clear band just below the wells, with no separations underneath and possible clear bands between the band and wells, as DNA should all still be intact and not multiple variable size fragments. If we see this, we will then treat the plugs with Spe1 and run them. We are expecting to see bands forming from the wells and towards the bottom of the gel, with clear bands throughout, but most dense around halfway down the gel, adjacent to our new low range PFG ladder, and the band – 100kb, as DNA will be lysed into approx. 86 fragments ranging from 817bp-13702bp, mostly around 10000bp (100kb).

Have a good weekend, and see you all on Monday 🙂

Evening All Today myself and Jo started our…

Evening All,

Today myself and Jo started our second batch of plugs, made from 10 different Propionibacterium acnes patient samples and a Propionibacterium acnes 6919 strain. We followed the same protocol as before, but made 4 plugs from the Propionibacterium acnes 6919 strain and 2 plugs from each of the 10 different Propionibacterium acnes patient samples. Mike checked their OD to ensure appropriate cell density (0.25). We also centrifuged down 2 eppendorf tubes containing 1ml of the same sample to pellet, we then eluted the pellet in 200ul of suspension buffer each, in order to produce a cell concentration of 2 x 10^8 ,we then removed 100ul.

Having agarose divided into separate eppendorfs was very useful when melting agarose to combine with the centrifuged samples.
However we did experience a few problems, when trying to pipette the agarose and centrifuged sample into the molds some bubbles formed, and some samples appeared to contain less then others resulting in some plugs being half the size of others. We decided that this was most likely due to one of our pipettes being inaccurate due to liquid internally, and that we only produced exactly how much we needed, resulting in some being lost during the procedure. In order to correct this Mike took apart and emptied the pipette for us, and we planned to modify the method to produce slightly more (10%) to allow for losses.

After the plugs had set, we separated them all into separate eppendorf tubes, added lysozyme and buffer, mutanolysin and incubated for 3 hrs at 37ºC. We then added proteinase K and buffer and left overnight to incubate.

We also discussed more appropriate ladders with Mike, he showed us afew that might be better to use, such as http://www.neb.uk.com/productcatalogue/productinfotransfer.aspx?id=/New%20England%20Biolabs/Markers%20and%20Ladders/PFG%20Markers/N0340.
We decided that tomorrow during plug washing, we would use the online genome cutting software we have used before to find exactly how many and what size fragments Spe1 would produce when lysing Propionibacterium acnes so we could make a final decision on ladder size range, and order one asap.

See you all tomorrow! 🙂

Evening all Today consisted of A LOT of…

Evening all!

Today consisted of A LOT of waiting! We started by washing the plugs in 1x wash buffer 4 times, for an hour each! This is to make sure that all the lysozyme and mutanolysin was removed. The plugs could then be stored in 1x wash buffer at 4°C.

We then put each plug into a separate eppendorf tube and washed once with 0.1x wash buffer for an hour, and then once more to ensure all EDTA had been removed, as it will remove cofactors that are very important to the restriction enzymes we want to use next! We then removed 3 plug eppendorfs, and put them into the fridge, in order to compare samples that were treated with restriction enzymes and those who weren’t. We removed the remaining buffer in the other 7, and added 1x restriction enzyme buffer to each, and left for an hour, at room temp. with gentle agitation. After this, we removed the restriction enzyme buffer, and added fresh restriction enzyme buffer, restriction enzyme (SpeI, which cuts at ACTAGT) and BSA (which acts as a crowder to increase conc. and allow increased collisions). This is to allow the fragmentation of our Propionibacterium acnes DNA, which is on average 100kb size fragments. We then incubated the plugs overnight.

Tomorrow we will be finishing off the plugs, preparing a new gel run and running a new gel with our home made plugs and new modifications.

See you all tomorrow! 🙂

Good Evening Everyone Busy day today Myself Jo…

Good Evening Everyone!

Busy day today! Myself, Jo and Mike discussed possible modifications to the plug making method when using Propionibacterium acnes. We decided that we would need to use mutanolysin, which aids in cell lysis, as Propionibacterium acnes can be difficult to break into! We also decided to prolong the incubation time after the addition of mutanolysin and lysozyme from 2 hours to 3 hours at 37°C, in order to give them plenty to time to work on the Propionibacterium acnes.

We then began running through our first attempt at making the plugs! We started by adding chloramphenicol to our Propionibacterium acnes TYGE broth (that Mike inoculated for us). Once that had incubated for an hour we centrifuged it at full speed for 5mins, until we obtained a pellet. We then eluted this pellet in cell suspension buffer. We melted agarose and added these together. We then pipetted this into plug molds, which required a bit of practise! (we made 10 plugs) and left them at 4°C, to solidify. Once set we removed them into a universal tube and added lysozyme, it’s buffer and mutanolysin, it was then incubated at 37°C for 3 hours. We then removed the plugs and rinsed the plugs with pure water. We then added proteinase K and it’s buffer and left it to incubate at 50°C, until tomorrow morning.

We will be washing the plugs A LOT tomorrow! 4 times per plug 1 hour each, with wash buffer! We will then be working through the restriction enzyme digestion of the plugs info, and hopefully get ready to set up our first run with our hand made plugs! 🙂

See you all tomorrow!