Tag: NEB yeast

Afternoon Quite a quick day today came into…

Amy Thompson / / Uncategorized

Afternoon,

Quite a quick day today, came into the lab stained and viewed our gel. We saw little/no separation from the Propionibacterium acnes 6919 strain restriction enzyme plugs and the non restriction enzyme plugs. However we did see separation from the NEB yeast.

Myself and Jo decided that this may be due to our newest plugs. As mentioned before one of the pipettes we were using was full of liquid, and therefore may have given us incorrect amounts of substances when being used. We were unsure as to whether this was resulting in no separations from plugs on our latest gel, so we decided to run another gel with 2 samples of our old Propionibacterium acnes 6919 strain restriction enzyme plugs, and 2 samples of our new Propionibacterium acnes 6919 strain restriction enzyme plugs, along with one sample of new non restriction enzyme plug and 1 sample of NEB yeast.

We are hoping that by doing this we can establish if the lack of separation is due to our new plugs being poor, or the settings recommended by the new ladder – low range PFG marker, not being quite right. We set up the gel ad ran it with the same settings as yesterday – 15hrs, 6 V/cm, 1-12 second switch interval ramping, 1% agarose, and then a second block to hold the gel at 0.6 Vcm, 5 second switch interval until tomorrow morning when we will be in to remove it, stain it and view it.

Filming our newest videoblog tomorrow… 🙂

Hello Everyone Yesterday we ran a 24 hour…

Amy Thompson / / Uncategorized

Hello Everyone!

Yesterday we ran a 24 hour gel, at 4 V/cm with a 20 second switch interval PFGE gel. We used 3 large restriction enzyme treated plugs and a NEB ladder. Mike also asked us to research the genome for Propionibacterium acnes and the size of the fragments produced when lysed with SpeI. He asked us to do this so that we would be able to sketch a rough drawing of what we would really like to see on a perfect gel. Also to help us look for a more appropriate ladder to use with the Propionibacterium acnes samples, as the average size of a fragment is approx. 100kb, and the NEB yeast we are currently using runs from approx. 1900-225, not quite low enough to compare most fragments.

Today we observed the gel with Mike, which was how he expected it to look, with the NEB bands close together near the top of the gel. However, no bands were visible under the Propionibacterium acnes samples and Mike thinks we really need to have another go at making the plugs, perfecting the cell density and process. We also filmed our latest videoblog!

See you all on Monday 🙂

Afternoon Everyone Started off today by viewing our…

Amy Thompson / / Uncategorized

Afternoon Everyone!

Started off today by viewing our latest gel with Mike. Unfortunately our samples ran completely off the gel, and therefore we only saw the areas where the samples had passed. We also saw that the wells were very dark, due to too much DNA still being present within them. We also used the wrong ladder for Propionibacterium acnes. Mike therefore decided that we should run our next gel for 24 hours, at 4V/cm with a 30 second switch interval time, based on our two best previous gels (PFGE 5 and 6). We also decided to cut our plugs into different sizes in order to see how the size of the plug would effect the gel. We cut the plugs into two small pieces, one medium piece and one large piece. We still used samples of both plugs treated with restriction enzyme and without. We also used a reference ladder of NEB yeast.

We then helped Mike to re culture the Propionibacterium acnes by making up TGYE agar, autoclaving it and pouring 15 plates 20ml each. Which i have seen done before, but never done myself, so it was good to have the opportunity to practise! Managed to pour them all pretty well 🙂

We came in at 5pm, to cut off the first well of the Propionibacterium acnes sample treated with restriction enzyme, to see it’s progress. We removed it, stained it and viewed it. We will interpret it when we have the final gel tomorrow.

See you all tomorrow, when our next gel comes out at 11am 🙂

Afternoon Everyone Pretty short day today Myself and…

Amy Thompson / / Uncategorized

Afternoon Everyone!

Pretty short day today, Myself and Jo came in at 11am to film our latest videoblog (I’m starting to really enjoy making them!) and talk through our previously filmed material from last week with Mike. Our footage won’t be up for you all to view for a little while yet, but I will let you know when Mike makes it available!

We then removed our latest gel from the PFGE, stained it and viewed it. We have made some initial observations; that the separations unfortunately ran off the end of the gel and we also sized up the bands using the information within the NEB yeast package.

Myself and Jo decided on some modifications between us, and we will be reviewing these with Mike on Monday morning.

Can’t believe week 2 of the project is over already! See you all next week! 🙂

Hello Everyone Myself and Jo got into the…

Amy Thompson / / Uncategorized

Hello Everyone!

Myself and Jo got into the lab early this morning, in order to set up our next PFGE run with our new modifications. We made up 3L of 0.5X TAE buffer and 150ml of agarose (in order to reduce error), then left the gel to set. While it was setting we made up 50ml of agarose to seal the plugs into the wells. We then cut up 4 samples of NEB yeast, pushed them into the wells and sealed them up with agarose. We then set up the PFGE equipment to run at 6°C, for 15 hours at 6 V/cm with a 70 second switch interval and then for 11 hours at 6 V/cm with a 120 second switch interval.

The run is to finish at 12.15pm tomorrow, so myself and jo will be in the lab from 11am to film our second videoblog section! 🙂

See you all tomorrow morning!

Evening all Myself and Jo spent this morning…

Amy Thompson / / Uncategorized

Evening all!

Myself and Jo spent this morning researching the next stages of our project, then we came into the lab for 3pm, in order to take our gel out of the PFGE. We then stained it up and viewed it with Mike. We saw much better separation than before, with the bands reaching all the way to the bottom of the gel, and running off. Both yeast samples, BioRad and NEB, also appeared consistent with each other. The 1Kb ladder was not visible, which was expected. However, the separations slightly shifted to the right, producing wonky bands, that unfortunately weren’t very defined. Mike said this was most likely due to imperfections in the agarose, and we could rectify this by producing 150ml of agarose in order to reduce error. In order to try and stop the yeast sample running off the gel we decided to change our switch interval as well. We also decided that as the NEB yeast has been the most consistent and successful sample, we would stop running the BioRad yeast and 1Kb ladder. We will keep the size of the plugs the same, and well as sealing them with agarose.

Reviewing the NEB yeast information we decided to try running our next gel following the guidelines provided, 1% agarose, 15 hours at 6 V/cm with a 70 second switch interval and then 11 hours at 6 V/cm with a 120 second switch interval. Using 0.5X TAE buffer, 2 samples of NEB yeast and at 6°C as before.

See you all tomorrow morning as we set up our next, and possible last gel before starting on our next stage in the project! 🙂